Every industry has its own standards, its own materials, its own definition of acceptable defect rate. We serve six primary verticals with dedicated quality workflows — and we turn away work outside our capability envelope rather than pretending to handle it.
Typical parts: Surgical instrument housings, orthopedic implants, endoscope components, robot end-effectors, bone screws, dental instruments.
Materials: Ti-6Al-4V ELI (F136), 316LVM, 17-4 PH H900, PEEK, Delrin.
Certifications: ISO 13485:2016. Biocompatibility testing per ISO 10993 via partner lab.
Special capabilities: Passivation per ASTM A967, electropolishing, laser marking of UDI codes, clean-pack with ISO 8 clean-room option.
Typical parts: Wing ribs, engine brackets, landing gear fittings, satellite structural parts, avionics housings, ground support hardware.
Materials: 7075-T7351, 2024-T351, Ti-6Al-4V, Inconel 718, 15-5 PH, 4340, A286.
Certifications: AS9100D. ITAR registered (project-specific).
Special capabilities: FAI per AS9102, full material traceability, Nadcap-adjacent NDT via partner (dye penetrant, ultrasonic), controlled-access project rooms.
Typical parts: Arm linkages, gripper bodies, drive housings, encoder mounts, base plates, ball screw mounting blocks.
Materials: 6061-T6, 7075-T6, Delrin, 4140, 17-4 PH.
Focus areas: Lightweight-strength optimization, tight bearing-bore tolerances, repeatable high-volume production.
Special capabilities: Surface grinding partner for precision bearing bores, H7/H8 bore tolerance standard, assembly services for sub-components.
Typical parts: Wafer chuck components, vacuum chamber parts, gas delivery manifolds, kinematic mounts, precision stages.
Materials: 6061 (hard anodize), 304L (electropolished), PEEK, PTFE, high-purity copper.
Focus areas: Ultra-clean parts, low-outgassing materials, sub-micron flatness, helium leak tightness.
Special capabilities: ISO 6 clean-pack, aqueous cleaning with DI water & IPA, helium leak testing via partner, electropolishing to Ra < 0.2 μm.
Typical parts: Battery cold plates, busbars, power electronics housings, motor end bells, inverter heat sinks.
Materials: 6061, 3003, copper C110, brazing alloys for liquid-cooling assemblies.
Focus areas: Thermal management, high-volume production, vacuum-brazed assemblies.
Special capabilities: Vacuum brazing partner, leak testing to 5 bar, conductive surface treatments (Alodine Class 3), IATF 16949 alignment.
Typical parts: Optical mounts, sample holders, mass spectrometer components, neutron shielding, lab automation fixtures.
Materials: 6061, 304, C110 copper, PEEK, OFHC copper, Kovar, Invar.
Focus areas: One-off and small-batch research prototypes, flexibility, fast turnarounds.
Special capabilities: Single-piece MOQs, direct engineer-to-researcher communication, willingness to iterate on design mid-project.
DDP shipping via DHL/FedEx, 3–5 day transit. Net 30 after credit check. Imperial + metric drawings accepted. Invoices in USD.
DDP with EORI pre-registration, 4–6 days. CE compliance for materials. ISO 2768 tolerances default. EUR invoicing. VAT-handled.
5–7 day DDP via FedEx/OCS. JIS-compliant drawings accepted. JPY/KRW invoicing. Japanese-language project support on request.
5–8 days DDP. AUD/SGD invoicing. GST handled. Customs duty calculated pre-quote for budgeting.
Email a sample drawing or tell us about the part you need. If it's outside our capability envelope, we'll tell you honestly and suggest alternatives. If it's in our wheelhouse, you'll have a quote within 4 hours.
Start a quote